Let’s speak about clay bead bracelets—typically referred to as flat beads, too. In case you are trying to get into jewellery making, that is most likely one of many best and most cheap DIY jewellery you can begin with.
Plus, there are SO many various concepts for clay bead bracelets! I’m going to share heaps on this publish, however you may dream up so many extra.
Clay beads are normally made from polymer clay and are available any and each coloration you may consider. Clay bead bracelets are enjoyable to make for a lot of ages, together with older children.
I truly purchased my 13-year-old niece the identical clay bead kit I purchased myself and we each love making jewellery from it. Additionally, take note any of those clay bead bracelet concepts could possibly be repeated or made bigger right into a necklace when you needed.
Associated: Try extra DIY equipment in our jewellery archive.

Clay Bead Bracelet Provides:
- Clay beads
- Elastic cord/Crystal string – I like to make use of colours however clear works nicely, too.
- Acrylic letter beads and different accent beads or charms (some kits include these)
- Crimping beads – for closures
- Connectors – I exploit these on bracelets with an elastic wire so you may pull it over your hand, so that you don’t want to lock a clasp, which will be troublesome one-handed.
- Scissors – the smaller, the higher (some jewellery pliers would work for this too)
- Jewelry pliers – for crimping beads and different jewellery making duties
- Bead board – or a felt to cowl your work floor
There are numerous alternative ways you may design your clay bead bracelet with completely different equipment or clasp and closures. However these are the fundamental provides that I used to make the bracelets you see pictured.

The way to Make Bead Bracelets:
- Design your bracelet. I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This fashion, I can be sure that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
- Reduce a chunk of elastic wire twice as large because the widest a part of your hand so you’ve gotten lots to work with.
- Loop the underside of the wire via a crimping bead, then one aspect of the connector, then again via the identical crimping bead once more.
- Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
- String your design onto the wire.
- Verify that the bracelet is the size you design (if not, add or take off beads).
- Add one other crimping bead to the tip, loop the wire via the opposite aspect of the connector, after which via the identical crimping bead and pull tight.
- Use your pliers once more to crimp down on the bead, fastening the wire in place.
- You probably have additional wire on both aspect, you may snip it off and/or tuck it into the beads beside it.

Clay Bead Bracelet Concepts:
Listed here are some concepts for various sorts of designs and coloration mixtures you may strive!
- Multicolored! You’ll be able to repeat the colours or simply add them at random.
- Use all main colours (purple, blue, yellow)
- Use all secondary colours (orange, inexperienced, purple)
- Monochromatic – use all one tone or just one coloration bead for a stable look.
- All white or black
- Break up clusters with charms or a glass bead.
- Add your identify or a pal’s identify for gifting.
- Add a allure or a number of charms for a allure bracelet look.
- Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.

The place to Purchase Beads?
Under, I’ll hyperlink lots of the particular beads and charms I’ve purchased on-line. But in addition remember that you should buy beads and jewellery making provides from many various locations like thrift shops, property gross sales, Etsy and eBay.
Additionally, if in case you have previous jewellery that you just not put on, you would possibly take it aside and repurpose it in your designs.
- My favourite basic clay bead bracelet kit (contains wire and instruments)
- Metal letters
- Fruit charms
- Mushroom beads
- Freshwater pearl beads

Incessantly Requested Questions
What number of clay beads make a bracelet?
For an grownup with small to medium palms, 125-150 clay beads will make a bracelet. You might want kind of or smaller or bigger sized bracelets.
What string do you utilize for clay bead bracelets?
Elastic wire (typically referred to as crystal string) is greatest. You should use clear or a coloration. However this wire may have some stretch so you may simply pull the bracelet on and off your hand with no need to make use of a clasp.
Are clay bead bracelets waterproof?
Polymer clay (which is normally what clay beads are made from) is waterproof. Nonetheless, most bracelets may have different supplies like string and charms and these could not maintain as much as soaking.
Can clay beads be washed?
Sure. Gently wash with cleaning soap and water when you get meals or grime in your bracelet. The colours is not going to run or fade.

DIY clay bead bracelets are such a enjoyable venture anybody can do. I additionally love that it’s one thing you may work on whereas watching a film. 🙂
Associated: 15 Crafts You Can Do Whereas Watching TV

Love this publish? Join our e-newsletter for extra concepts!
Get inventive concepts for recipes, crafts, decor, and extra in your inbox!
Print
Get the How-To
the right way to make clay bead bracelets plus plenty of concepts for designs
Directions
-
Design your bracelet – I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This fashion I can be sure that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
-
Reduce a chunk of elastic wire twice as large because the widest a part of your hand, so you’ve gotten lots to work with.
-
Loop the underside of the wire via a crimping bead, then one aspect of the connector, then again via the identical crimping bead once more.
-
Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
-
String your design onto the wire.
-
Verify that the bracelet is the size you design (if not, add or take off beads).
-
Add one other crimping bead to the tip, then loop the wire via the opposite aspect of the connector, then via the identical crimping bead and pull tight.
-
Use your pliers once more to crimp down on the bead, fastening the wire in place.
-
You probably have additional wire on both aspect, you may snip it off and/or tuck it into the beads beside it.
Notes
- Multicolored! You’ll be able to repeat the colours or simply add them at random.
- Use all main colours (purple, blue, yellow)
- Use all complimentary colours (orange, inexperienced, purple)
- Monochromatic – use all one tone or just one coloration bead for a stable look
- All white or black
- Break up clusters with charms or a glass bead
- Add your identify or a pal’s identify for gifting
- Add a allure or a number of charms for a allure bracelet look
- Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.
Latest News
-
The Greatest Hair Loss Therapies for Girls
-
Scarecrows, Ghosts, and Fall Enjoyable at Peddler’s Village
-
A Girlfriend Getaway at Rosewood Miramar Seashore • The Blonde Overseas
-
Augusta 70.3 Half Ironman – Peanut Butter Fingers
-
Non-Poisonous Magnificence, Clear Dietary supplements & Anti-Growing older Hacks